This Immo bypass tool is made to work with Fiat, Lancia, Alfa-Romeo, Iveco vehicles with Immo code system 2. The device can do automatically the following function:
Identification of the control unit via OBD II.
Resetting of the EPROM to virgin state in the ECU via OBD II without the use of the PC software.
Emulation of the Immo system code in the ECU via OBD II without using the PC software.
All these functions will allow you to start the vehicle whle the device is plugged into the OBD II connector of the car .When you remove the device from the OBD II connector the car will not start anymore until you plug in the device again into the OBD II connector whle the ECU will stay in virgin mode and you will be able to adapt any BCM or Immo box with existing working key!
The whole procedure is done for 3 – 10 seconds.
THIS DEVICE NOT PROGRAMMING KEYS!!
Fiat PANDA from 2012 to 2017 all engine models
Fiat 500 from 2007 to 2017 all engine models
Fiat 500 L – from 2007 to 2009 / 1.2 and 1.4 petrol / and 2010 – 2017 – all engine models
Lancia YPSILON from 2012 to 2017 all engine models
Alfa Romeo MITO from 2008 to 2017 all engine models
Fiat Grande Punto from 2008 to 2017 all engine models
Fiat Fiorino from 2008 to 2017 all engine models
Fiat new Doblo from 2012 to 2017 all engine models
Alfa Romeo -GIULIETTA from 2010 to 2017 all engine models
Fiat Abarth 500 from 2008 to 2017 all engine models
Fiat Ducato – 2010/2017 when equipped with DELPHI BCM MODULES or Mageti Marelli ecu 8f2 for 2.8 l engines
IVECO – from 2010 to 2017 Delphi BCM MODULES
Ford KA from 2008